To access your router settings page you can type 192.168.1.20 on your browser or you can use the links below:
Typically, 192.168.1.20 is the IP address that you are using to login into the router admin panel where you can change the WiFi password, SSID, and default router setting. The IP address is initially pre-assigned by router manufacturing companies and WiFi repeaters
192.168.1.20 should be your router admin IP address. Accessing this IP address will only be possible if you are connected to the same local network as your WiFi router.
Based on our statistics, with a frequency of 58% of the total uses for the 192.168.1.20 IP address, username: admin and the password: password are the most used credentials on routers across the globe.
We have processed millions of data records in order to have a clearer picture of the most used default credentials for almost every WiFi router on the market and for the most common IP addresses.
Typically, when you purchase a router, the manufacturer may provide you with a username and password to log in to the device’s configuration interface. If you lose this information or if the router is not working properly, you may need to find these login credentials. There are several ways to do this.
The username and password that allows access to the router’s settings, web interface, and configuration, for a new router, are defined by the manufacturers using a relatively small set of values. The credentials table below includes the most used credentials for the 192.168.1.20 IP address, so we encourage you to check them first.
For a brand new router, if none of the values are present, there is the option to check the specific brand and model most frequently used credentials from the links below, or perform a search.
If your router was already configured and for some reason, you forgot the credentials, there are multiple options to recover them.
There are several ways to do this. One way is to use the router’s IP address. Open a web browser and type in “192.168.1.20“ (the default IP address for your router). You should see a login screen where you can enter your username and password.
Sometimes, the username and password form is already filled with existing information. If that’s the case, you will only need to hit enter or press the login button.
Still, if you need to find the password for your router to use it on a different device or browser, you can do so by accessing saved passwords stored in those browsers.
Since in this case, you can easily read the username, for revealing the saved password you can check the instructions for the browser type you are using.
Another way to find your router’s login information is to use a tool like RouterPassView or WiFi Password Decryptor.
If none of the above succeeded you might need to reset router credentials
The router password can be reset by resetting the router to factory settings. Please be aware that this operation will lose all your previous settings.
If you have no access to the user manual with detailed information, you can start by turning off your router and waiting for 15 seconds. During this time you need to find the reset button, usually, it is located on the back of your router. Turn on the router and press the reset button for at least 15 seconds, until the power LED starts blinking, which means the reset process is taking place.
After the power LED becomes steady green, it is time to connect again to the router IP 192.168.1.20 to access the management interface.
Now the router’s password is reset to its default value. However, it is always a good idea to change these default settings to something more secure.
Passwords are the secret to virtually every little thing nowadays, and also you most likely have numerous passwords that you make use of throughout the day.
When it concerns your router password you will be extremely cautious. Visualize a hacker breaching your router as well as setting up a malicious software program that will record your most sensitive information (or money from online banking!).
For sure you don’t desire that. In this regard be smart and transform your default password with a solid 12 to 16 characters password.
Complexity counts, although some might locate complex passwords hard to keep in mind, are hard to guess also by strength. The general method is to utilize funding, unique characters, and numbers in your password.
If you hesitate you are not likely to remember your password you can always utilize a trusted password manager. Some ideas for password managers that you can use, are listed below:
To access your router settings you need to enter the 192.168.1.20 IP address in the web browser and access the management dashboard.
In order to access the router settings page, you will be required to authenticate, using admin-level credentials.
On the router settings page, you will be able to configure all the settings related to IP addresses, WiFi network settings, security-related options, and firmware updates. More advanced options like VPN and related features, usually have dedicated menu entries.
Once on the settings page
This guide will teach you how to access your router’s settings from a web browser. You will also learn how to change your router’s settings, including the address and port number.
When you’re at home and connected to Wi-Fi, you probably don’t think about who else might be using your network. You may not even be aware of all the devices that are currently connected to your home network. Here’s how to check who’s using your Wi-Fi and how to kick them off if they’re not authorized.
First, open the Network and Sharing Center by clicking on the network icon in the system tray and selecting “Open Network and Sharing Center”.
Next, click on “Manage Wi-Fi Networks” in the left column.
You should now see a list of all the networks to which your computer is currently connected. Beneath each network name, you’ll see a list of devices that are currently connected to that network.
A more technical approach will be to connect to the router dashboard page and locate the connected clients’ section in the menu. Once on that page, you will see active connected devices to your network. The device list includes the device type and MAC address for each device. Depending on your router model you can choose to white list or to blacklist specific devices using their MAC addresses.
In general, it is a good thing to check for active connected devices to your WiFi network to prevent suspicious devices from connecting to your network.
Whenever you are having guests that need to access a Wi-Fi network at your home or office, it is a safe approach to create a dedicated guest network. The purpose of the quest network is to not allow unknown and not trusted devices to access the same network where you have your personal shares and personal data. This is a necessary measure to be applied also for the new generation smart devices like air conditioning and vacuum devices that require an internet connection from your home.
Connect everything that you don’t trust to your quest network that can be created with a click from your Wi-Fi router. Most of the new generation WiFi routers come with the option to create a guest network that works in parallel with your main WiFi network but as a separate network.
More advantages of configuring a guest network include also the fact that you are not sharing your main network credentials with other people.
Anyone who has ever used a Wi-Fi network knows that it can be challenging to find the network’s SSID. This is especially true if you are using a new or unfamiliar network.
If you want to know the network SSID of a wireless network, there are a few methods you can use.
One is to scan for networks using a wireless scanning tool, such as Network Scanner. You can also try searching for the network name or SSID using Google or Bing search engines.
Knowing the network SSID is useful If you’re having trouble locating the network, so you can also manually input its SSID into your wireless device’s settings.
If your home has multiple stories, or if you just can’t seem to get a good WiFi signal in certain parts of your house, you may need to invest in a wireless extender. A wireless extender is a small device that you can plug into an outlet near the spot where you’re having trouble getting a signal. It will amplify the signal and help to extend the range of your network.
A recent study by the National Association of Home Builders found that 50 percent of new homes have two or more stories and that 30 percent of homeowners say they have trouble getting a good WiFi signal in some parts of their homes.
There are many different types of wireless extenders available on the market, so it can be hard to determine which one is right for you. The WiFi extender can then send the signal from your router to the device you are extending your WiFi range to. This is different from a repeater, which is a device that simply repeats the signal from your router.
In general, the simplest way to connect your Wi-Fi extender is by using the WiFi Protected Setup (WPS). WPS is a smart function available with a new generation of routers, used to simplify the way to connect Wi-Fi enabled devices to a secure wireless network.
First, you have to choose a location for your WiFi extender. The best place to place the extender will be at half of the distance between the router you want to extend and the device you need to connect. Plug the WiFi Extender into the power outlet and wait for the power LED to become green (if the power LED is red or amber, place the extender closer to the router). Then push the WPS button on your WiFi extender, then you have to press the WPS button on your WiFi router.
The WPS LED will become solid green when the connection between the 2 devices is established and you can now start using the WiFi extender to connect to your network.
An IP address – is a series of numbers that identifies any device or computer system on a network. Computers use IP addresses to communicate with each other both over the internet in addition to on other networks.
192.168.1.20 is called a private, local, IP address that is considered the head of your network. 192.168.1.20 is used to both access your router’s user interface and also to enable smart gadgets to attach to the router.
You can think of your router’s IP address as a PO box for your mail. Any kind of messages you get through the post goes straight to your PO box, though as opposed to you going to gather, your router will send the message to the smart gadget or computer that requested it.
As explained, your IP address, such as 192.168.1.20, can be assigned to your router by default by the manufacturer. If you are not sure what is your default IP, you can usually find it on the base of your router, in the individual handbook that accompanies the router or you can search on this page.
To find the IP address of a Microsoft Windows computer, you can follow these steps:
Another option will be:
Click on the network icon, located at the bottom right of your screen. With the menu open, find the network you use for your internet and pick residential properties. Scroll with this menu until you find IPv4. This chain of numbers, comparable to 192.168.1.20, is your IP address.
That’s it! You have now found the IP address of your Microsoft Windows computer.
To find the IP address of a Mac OS computer, you can follow these steps:
That’s it! You have now found the IP address of your Mac OS computer.
192.168. 1.2 IP is a private IP address a default login IP that is reserved for modems or wireless routers. This default login IP is specific for modems or wireless routers.Dec 18, 2020
192.168. 100.1 is a private IPv4 network address, meaning that you cannot connect to the client device or router from outside the home network like you can with a public IP address. Its use is only relevant within a local area network.Jun 22, 2021
The default IP address is 192.168. 0.1. At the login, enter the username (admin) and your password (default password is nothing). Note: If you have forgotten this password, you will have no choice but to reset the router to factory defaults.
If you have Wifi Analyzer installed on your Android smartphone, launch the app. You will see the channel graph tab immediately. Swipe to the Access Points tab and you will see the IP address of your router.Oct 20, 2021
Resetting the password for 192.168. 1.2 ? All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your modem.
If you have default settings enter admin for the username and password for the password.Jun 10, 2021
#2) Generally, for most of the routers, the default username and password is “admin” and “admin”. However, these credentials may vary depending upon the maker of the router.Sep 24, 2022
Finding your wifi password on your phone If you have Android 10 or anything newer, you can find the wifi password directly on your phone following these steps: Go to “settings” on your phone, then “wifi”. Select “saved networks” and click on your home network. Choose the share option and enter your password.
Another common credential configuration is admin as the username and password as the password. In rarer cases, the password will be blank, so after typing in admin as the username, you can just press the “Enter” button on your keyboard to login without filling in the password field.Sep 27, 2021
Step 1: Swipe a finger down from the top to expand the Notification Shade and tap the Cog icon. Step 2: With the Settings panel open, tap Network & Internet. On Samsung phones, tap Connections instead. Step 3: Tap Wi-Fi.Apr 14, 2021
It may often be solved by restarting the router. This is the gateway to your router's settings. It's where you can change your Wi-Fi password, check for firmware updates, and configure your network. Regularly updating the firmware is also necessary as it could be part of the reason why you can't access the router page.Jan 27, 2022
The default gateway is the path used to pass information when the device doesn't know where the destination is. More directly, a default gateway is a router that connects your host to remote network segments. It's the exit point for all the packets in your network that have destinations outside your network.
Class B IP addresses, where the 1st two bits are 10, are in the range of 128.0. 0.0 to 191.255. 255.255. This class is for medium networks and has 16 bits for network and 16 bits for hosts.
A default gateway is the node in a computer network using the Internet protocol suite that serves as the forwarding host (router) to other networks when no other route specification matches the destination IP address of a packet.
The default IP address is 192.168. 1.1, and the default login username and password both are admin (all lower case).Mar 24, 2022
|Table of contents|
|Find the username and password for your router|
|Find username and password for an already configured router|
|How to reset router password|
|Changing the router default password|
|How to Access Your Router’s Settings from a Web Browser|
|How do you know who’s connected to your Wi-Fi?|
|How to Find the network SSID|
|How do I connect my 192.168.1.20 WiFi extender?|
|What is the purpose of 192.168.1.20 IP Address?|
|Exactly how to find your private IP Address?|
|Frequently asked questions related to 192.168.1.20 IP address|
Our records indicate that these are frequently misspelled IP addresses:
The correct usage of the IP address to access the router interface is http://192.168.1.20 in the address bar instead of the ones above.
Based on our data and experience, with a frequency of 58% of the total uses, the 192.168.1.20 IP address is the most used on SonicWALL routers.
Our records indicate that the most frequent router brands are using this default IP address:
Using our extensive database we discovered the most common IP addresses: